- Home
- Appliances
- Dishwasher repair
Dishwasher Repair — Greater Phoenix
Dishwashers in the Valley take a beating from hard water, and the symptoms — cloudy glasses, standing water, a door that leaks — are usually fixable. Call and we'll connect you with an independent local company that repairs built-in dishwashers.
A person answers Mon-Fri 9am-5pm. Outside those hours, leave a message and a local company calls you back.
Answered by an independent Phoenix-area appliance repair company. Not a call center.
Dishwasher problems
- Won't drain — standing water in the bottom
- Not cleaning or leaving film on glasses
- Leaking from the door or underneath
- Won't start or won't fill
- Not drying dishes
- Error codes on Bosch, Samsung, KitchenAid and Whirlpool
- Noisy pump or grinding
What's your dishwasher doing?
Pick the symptom for the likely cause, what to check first, and when it needs a technician.
Frigidaire dishwasher not draining: what's blocking it and what to do
Standing water at the end of a cycle means the drain pump either isn't running or can't move water through a blocked…
Read the fix →Samsung dishwasherLCSamsung dishwasher LC code: what it means and how to fix it
The LC code means the moisture sensor sitting in the base pan under the tub has found water where there shouldn't be…
Read the fix →GE dishwasherGE dishwasher not draining: why water sits in the bottom and how to fix it
Standing water means the dishwasher couldn't push wash water out through the drain path, which runs from the sump filter…
Read the fix →Bosch dishwasherE15Bosch dishwasher code E15: what it means and how to fix it
E15 means a foam float in the base pan under the tub has risen and tripped the leak safety switch, so the dishwasher…
Read the fix →Whirlpool dishwasherDishwasher not draining, Whirlpool: what it means and how to fix it
Standing water at the end of a cycle means the machine either can't push water out or something is blocking the path to…
Read the fix →Bosch dishwasherBosch dishwasher not draining: what's causing the standing water
Standing water at the end of a cycle means the drain path is blocked or the drain pump isn't moving water out. Food…
Read the fix →KitchenAid dishwasherKitchenAid dishwasher not draining: what's blocking it and how to fix it
Standing water at the end of a cycle means the drain pump either can't move the water or can't get a clear path to the…
Read the fix →Repair it or replace it?
The rule most technicians use: if the repair would cost more than half of a comparable new unit and the appliance is past two-thirds of its typical life, replace it. A good local company will say so on the phone.
In the Valley, heat is the variable people miss. Garage laundry rooms and second refrigerators run at 110°F or more all summer, which shortens compressor, pump and belt life by years.
Hatched span is the upper end you shouldn't count on in an uncooled garage. Ranges are the manufacturer figures technicians work from, not a promise about your unit.
Dishwasher repair by brand
Brand names identify the appliance you own and do not imply any affiliation with the manufacturer.
Dishwasher repair by cityCommon questions about appliance repair in Phoenix
Why do my glasses come out cloudy in Phoenix?
Valley water is very hard. Mineral scale builds up on the heating element, spray arms and glassware. A technician can descale and check the rinse-aid dispenser; a repair company will also tell you whether a water softener or a different detergent will help more than a repair.
There's water sitting in the bottom after the cycle. What's wrong?
Usually a clogged filter, a failed drain pump, or a kinked or blocked drain hose. Check the filter first; if it's clean and water still stands, call and describe the symptom.
Do repair companies install dishwashers too?
Many do. If the technician finds the unit isn't worth repairing, ask whether they install replacements.
Talk to a local appliance repair company, not a bot
One call connects you with an independent repair company in your part of the Valley. Mon-Fri 9am-5pm.